NEW ICON TEAM MOTOR - 17.5 Turn (image is representative of the motor design, but not the wind of the motor)
Designed in the USA, we are proud to announce the all new ICON Series racing motors!
Ground Breaking Technology! We have forever changed the RC Industry and the way racers think about tuning motors!
The heart of the new ICON is our "Patented" (U.S. Patent D823,803) designed stator and patent pending "Tuning Pins". These 2 key elements will be total game changers for your racing program! Our patented design stator provides maximum torque while producing the most insane RPM ever seen before! Plus we've also added the ability to fine tune your motor via "Patent Pending Tuning Pins". That's correct, another first from Fantom! With our unique design, we've totally eliminated the need for stator screws. Instead we've replaced them with "Tuning Pins" which allows you to fine tune the Torque vs RPM of your motor! Why settle for an all purpose motor when you can have a motor designed to fit your exact application!
IMPORTANT: Tuning Pins are only included with the Works Edition version, or can be purchased separately.
Up your game and see for yourself why the all new ICON truly is a Game Changer! Whether you race On-Road or Off-Road, 1S or 2S.....We've got you covered!!
Specs and Features:
- All R&D Done In The USA
- Patented Stator Design (U.S. Patent D823,803)
- New Precision Machined 1-Piece Can Design
- Center band of can designed around stator for better heat dissapation
- New High-Power / Low Resistance, 3mm Aluminum, Silver Plated Collector Ring
- New Patent Pending Tuning Pins, provides multiple options for precise tuning capability (included with Works Edition motors only)
- New Super High Strength and Heat Resistant Magnet Formula
- New Sensor Board Design for Improved Deviation Accuracy
- New Venting Designed to Maximize Heat Dissipation
- New Maximum Size Allowed, Pure Copper Wire for Lowest Resistance Possible
- Meets All ROAR, BRCA, IFMAR, EFRA Specifications
- Premium Grade Kawasaki® Steel Stator Plates
- CNC Machined Billet T6 Aluminum End Plate for Precision Bearing Alignment
- Maximum Adjustable Timing
- High RPM Precision Bearings
- Additional Tuning Options Available Separately
- ROAR APPROVED
- Professionally built to our strict standards, which includes: the rotor properly shimmed, complete evaluation of coils, rotor strength, assymmetry, and sensor board deviation to match our strict tolerances. The timing is also set to our recommended setting for your application or you can choose a custom setting.
- Coil Resitance, Rotor Strength, and Dyno Results included!
- All Team Edition motors are guaranteed to meet our strict specifications!
TEAM MOTOR DETAILS:
Re-Shim (standard brass shims) - We adjust the rotor shims so that the rotor "floats" centered properly within the magnetic field. If required, the rotor shaft is also polished to ensure that it fits the inner race of the bearing correctly. We also make sure that it has the correct end play, so that it is not bound up or too loose.
Dyno Test - Your motor is tested on our Fantom dyno, through an ESC. The ESC is set at the default settings (no added programming). This test evaluates RPM, Power and Torque.
Rotor Strength Test - Your rotor is tested to make sure it meets proper specs. If we find that the rotor does not meet our strict standards, we will replace it. With this test, the rotor's magnetic field strength is tested on our Fantom Facts Machine v3 rotor tester.
Coil Resistance Test - Your stator is tested to make sure it meets proper specs. With this test, we evaluate the ohms resistance of your stator to make sure it meets proper specs and to detect shorts. Each coil is tested individually. If we find that the stator does not meet our strict standards, we will replace it. With this test, the stator coils are tested on an Instek GOM-801H, which is the same as ROAR uses.
Set Motor Timing - This option allows you to either choose to have us set your timing to our recommended setting based on the race application that you select, or we can set it to your own custom setting. To set your timing, we use the highly accurate Motolyser brushless motor tester. IMPORTANT: If you choose to have us set your timing to our recommended setting, we set the timing based on blinky mode ESC operation.
Motor Evaluation - All Team motors are evaluated using the highly accurate Motolyser brushless motor tester. This includes checking the rotor strength and assymmetry, as well as the sensor board deviation and timing accuracy. We do not include Motolyser test results, but all Team motors are guaranteed to meet our strict Motolyser tolerances.
IMPORTANT: We use our Fantom Facts Machine v3 to test our rotors and the Instek GOM-801H to test our stators. The Instek GOM-801H is the same equipment that ROAR uses to evaluate motors. It is important to know that there is no standard in the RC industry for testing brushless rotors and stators. There are numerous testers on the market, including the Trinity, MMS and others, that all provide different information. The information can vary greatly. For example, one company's meter may read 1550 for a rotor, where our meter may read it as 1500. The same goes for stator readings. For example, a 19.5ohm reading on another brand meter, may be the same as a 20.2ohm reading on our tester. The Fantom Facts Machine v3 rotor tester is the most accurate rotor tester in RC and is calibrated to the highest standards, so you can feel confident that we are providing you with the most accurate testing in RC.